What causes engine wear?

What causes engine wear?

The engine is the most complex and important part of the whole vehicle, and it is also the most prone to failure and multiple parts.

According to the investigation, the engine failure is mostly caused by the friction between the parts.

What causes engine wear?

1

Dust wear

When the engine does work, it needs to inhale air, and the dust in the air will also be inhaled, even if there is still some dust that will enter the engine after the air filter.

2

Corrosion wear

After the engine stops running, it cools from high temperature to low temperature. In this process, the gas with higher temperature inside the engine condenses into water droplets when it encounters the metal wall with lower temperature, and long-term accumulation will seriously corrode the metal parts in the engine.

3

Corrosion wear

When the fuel is burned, many harmful substances will be produced, which will not only corrode the cylinder, but also cause corrosion to other parts of the engine such as cams and crankshafts.

4

Cold start wear

Engine wear is mostly caused by cold start, the car engine stops for four hours, all the lubricating oil on the friction interface will return to the oil pan. Start the engine at this time, the speed has been more than 1000 revolutions within 6 seconds, at this time if the use of ordinary lubricating oil, the oil pump can not hit the lubricating oil to various parts in time.

In a short period of time, dry friction with periodic loss of lubrication will occur, resulting in severe and abnormal strong wear of the engine, which is irreversible.

5

Normal wear

All parts that are in contact with each other will inevitably have friction, resulting in wear. This is also one of the reasons why the oil needs to be changed frequently.

How to reduce engine wear

Choose Ribang synthetic engine oil.

Ribang lubricating oil is made of exclusive formula, the selection of high-quality raw materials, improve fuel economy, better protect the exhaust aftertreatment system, with efficient anti-wear performance, removal of carbon deposits and dispersion of sludge ability, in the cold start of the car can react faster, reduce engine wear.

Therefore, to reduce engine wear, we must first change a barrel of good oil, in addition to reduce driving in harsh environments, and also carry out the appropriate time of hot car when cold starting in winter to develop good driving habits.